Yards to Tons Calculator Logo
Yards to Tons Calculator

Gravel Yards to Tons Calculator

Convert cubic yards of gravel to short tons using standard dry gravel bulk density (105 lb/ft³).

Decimals

Presets fill a typical bulk density. Choose "Own Density" to enter your lab/scale value.

Enter the volume in cubic yards. The calculator will update all results instantly based on your density.

Result (short tons)
0
Pounds
0
Metric tonnes (t)
0

Calculated from pounds → kilograms → tonnes.

How the Gravel Yards to Tons Conversion Works

Converting cubic yards of gravel into short tons requires connecting volume with weight through material bulk density. In the United States customary measurement system, one cubic yard contains exactly 27 cubic feet, and one short ton weighs exactly 2,000 pounds.

Standard dry gravel (sized 1/4 inch to 2 inches) has an established bulk density preset of 105 pounds per cubic foot (lb/ft³). To calculate weight:

tons = cubic yards × 27 × density (lb/ft³) ÷ 2,000

For dry gravel at 105 lb/ft³, one cubic yard weighs 27 × 105 = 2,835 pounds. Dividing 2,835 by 2,000 gives 1.4175 tons (rounded to 1.42 short tons per cubic yard).

Why Real-World Gravel Density Varies

Gravel is not a single uniform material. When ordering gravel for a driveway, foundation, or landscaping project, actual truck scale tickets will vary depending on three critical factors:

  • Moisture content: Surface moisture fills air gaps between stones. While dry gravel weighs 105 lb/ft³ (1.42 tons/yd³), rain-soaked or wet gravel reaches 125 lb/ft³ (1.69 tons/yd³)—an increase of nearly 20% in haul weight.
  • Compaction and handling: Freshly excavated or dumped loose gravel contains more air voids and weighs only 95 lb/ft³ (1.28 tons/yd³). Once spread and rolled under heavy equipment, it settles closer to dense bank conditions.
  • Stone sizing and sand mix: Clean, uniform washed stone (such as #57 drainage gravel) contains larger voids. Graded crusher run or gravel with sand blends stone particles with sand fines, packing the void space and raising density to 120 lb/ft³ (1.62 tons/yd³).

Worked Conversion Examples

The following examples demonstrate exact conversions using our calculator's 105 lb/ft³ dry gravel preset:

5 Cubic Yards of Gravel

5 × 27 × 105 ÷ 2,000 = 14,175 ÷ 2,000

= 7.09 short tons (14,175 lb)

A common order size for residential garden pathways and small patio sub-bases.

10 Cubic Yards of Gravel

10 × 27 × 105 ÷ 2,000 = 28,350 ÷ 2,000

= 14.18 short tons (28,350 lb)

A standard load delivered by a medium tandem dump truck for driveway resurfacing.

20 Cubic Yards of Gravel

20 × 27 × 105 ÷ 2,000 = 56,700 ÷ 2,000

= 28.35 short tons (56,700 lb)

Sufficient bulk material for substantial driveway construction or large French drain trenches.

Reverse: 10 Tons of Gravel

10 × 2,000 ÷ (27 × 105) = 20,000 ÷ 2,835

≈ 7.05 cubic yards

If your quarry quotes deliveries by weight, 10 tons yields approximately 7.05 cubic yards of loose coverage.

Gravel Yards to Tons Conversion Table (Dry Gravel)

Quick look-up weight table for standard dry gravel (105 lb/ft³ bulk density). Values are shown in short tons (2,000 lb) and total pounds:

Cubic Yards (yd³) Weight in Short Tons Weight in Pounds (lb)
1 yd³1.42 tons2,835 lb
2 yd³2.84 tons5,670 lb
3 yd³4.25 tons8,505 lb
5 yd³7.09 tons14,175 lb
10 yd³14.18 tons28,350 lb
15 yd³21.26 tons42,525 lb
20 yd³28.35 tons56,700 lb
25 yd³35.44 tons70,875 lb
50 yd³70.88 tons141,750 lb
Reverse relationship: 1 ton of dry gravel equals approximately 0.71 cubic yards. If you know the weight you need in tons and want to calculate the volume in cubic yards, visit our dedicated Tons to Yards Calculator. For all other aggregate materials, return to the main Yards to Tons Calculator.

Frequently Asked Questions

How many tons is 1 cubic yard of gravel? ▼
One cubic yard of standard dry gravel (105 lb/ft³) weighs approximately 1.42 short tons (2,835 pounds). Wet or saturated gravel (125 lb/ft³) weighs about 1.69 tons per cubic yard, while loose dry gravel (95 lb/ft³) weighs roughly 1.28 tons per cubic yard.
How many cubic yards of gravel are in 1 ton? ▼
One short ton (2,000 pounds) of standard dry gravel equals approximately 0.71 cubic yards (2,000 ÷ 2,835). For wet gravel, 1 ton yields about 0.59 cubic yards, and for loose gravel, 1 ton equals roughly 0.78 cubic yards.
How many tons is 10 cubic yards of gravel? ▼
Ten cubic yards of standard dry gravel weighs approximately 14.18 short tons (28,350 pounds). In the reverse calculation, a 10-ton gravel delivery supplies about 7.05 cubic yards of dry material.
How do you calculate tons from cubic yards of gravel? ▼
Multiply the volume in cubic yards by 27 to find cubic feet, multiply by the gravel density in pounds per cubic foot (105 lb/ft³ for dry gravel), and divide by 2,000. Formula: tons = (cubic yards × 27 × 105) ÷ 2,000.
Why does gravel weight vary between suppliers? ▼
Gravel weight varies due to moisture absorption, stone gradation, and compaction. Saturated gravel can weigh 125 lb/ft³ (1.69 tons/yd³), while dry loose gravel weighs 95 lb/ft³ (1.28 tons/yd³). Mixtures containing stone dust or sand pack tighter and weigh around 120 lb/ft³ (1.62 tons/yd³).