Yards to Tons Calculator Logo
Yards to Tons Calculator

Concrete Yards to Tons Calculator

Convert cubic yards of standard concrete (150 lb/ft³) to short tons, or toggle to calculate yards from tons.

Decimals

Presets fill a typical bulk density. Choose "Own Density" to enter your lab/scale value.

Enter the volume in cubic yards. The calculator will update all results instantly based on your density.

Result (short tons)
0
Pounds
0
Metric tonnes (t)
0

Calculated from pounds → kilograms → tonnes.

How the Concrete Yards to Tons Conversion Works

Converting cubic yards of concrete into short tons translates physical pour volume into haul weight and slab dead load. Under the United States customary measurement system, one cubic yard contains exactly 27 cubic feet, and one short ton equals 2,000 pounds.

Concrete is the heaviest material preset in our calculator, with a standard bulk density of 150 pounds per cubic foot (lb/ft³). At this density, one cubic yard weighs 4,050 pounds (27 × 150), which equals 2.03 short tons:

tons = cubic yards × 27 × 150 lb/ft³ ÷ 2,000 = cubic yards × 2.025

Because concrete is exceptionally dense, one short ton covers far less spatial volume (only 0.49 cubic yards or 13.33 cubic feet) compared to lighter loose aggregates like gravel (0.71 yd³/ton) or mulch (4.94 yd³/ton).

Why Real-World Concrete Density Varies

While 150 lb/ft³ (2.03 tons/yd³) is the universal engineering benchmark for plain unreinforced concrete, actual batch weights fluctuate based on mix design:

  • Aggregate density: Standard mixes utilize crushed stone or river gravel weighing 145 to 150 lb/ft³. Lightweight structural concrete made with expanded shale or clay drops to 90–115 lb/ft³ (1.22–1.55 tons/yd³), whereas radiation shielding uses heavy hematite or barite aggregates reaching 180 to 250 lb/ft³.
  • Steel reinforcement: Reinforced concrete slabs and footings containing dense rebar mats and wire mesh typically weigh 155 lb/ft³ (2.09 tons/yd³) due to the density of structural steel (490 lb/ft³).
  • Water content and consolidation: Wet mix slump and entrapped air affect batch scales. Proper mechanical vibration removes air pockets and consolidates the paste, maximizing cured density and structural strength.

Worked Conversion Examples

The following examples demonstrate exact conversions calculated from our standard 150 lb/ft³ concrete preset:

5 Cubic Yards of Concrete

5 × 27 × 150 ÷ 2,000 = 20,250 ÷ 2,000

= 10.13 short tons (20,250 lb)

Typical volume for a standard residential garage apron or backyard patio slab.

10 Cubic Yards of Concrete

10 × 27 × 150 ÷ 2,000 = 40,500 ÷ 2,000

= 20.25 short tons (40,500 lb)

Standard full payload for a commercial ready-mix concrete barrel truck.

20 Cubic Yards of Concrete

20 × 27 × 150 ÷ 2,000 = 81,000 ÷ 2,000

= 40.50 short tons (81,000 lb)

Two complete ready-mix deliveries for monolithic home foundation pours.

Reverse: 10 Tons of Concrete

(10 × 2,000) ÷ (27 × 150) = 20,000 ÷ 4,050

≈ 4.94 cubic yards (133.33 ft³)

When planning axle weight limits, 10 short tons yields roughly 4.94 cubic yards.

Concrete Yards to Tons Conversion Table

Quick reference table listing weights for standard normal-weight concrete (150 lb/ft³ / 4,050 lb/yd³) across standard construction volumes:

Volume (yd³) Short Tons (2,000 lb) Pounds (lb) Metric Tonnes (1,000 kg)
1 yd³2.03 tons4,050 lb1.84 t
2 yd³4.05 tons8,100 lb3.67 t
3 yd³6.08 tons12,150 lb5.51 t
5 yd³10.13 tons20,250 lb9.19 t
10 yd³20.25 tons40,500 lb18.37 t
15 yd³30.38 tons60,750 lb27.56 t
20 yd³40.50 tons81,000 lb36.74 t
25 yd³50.63 tons101,250 lb45.93 t
50 yd³101.25 tons202,500 lb91.85 t
Reverse relationship: 1 ton of concrete equals approximately 0.49 cubic yards (13.33 cubic feet). If you know your total weight or demolition rubble in tons and need to find the equivalent volume, visit our dedicated Tons to Yards Calculator. For other job site materials, explore our Gravel Yards to Tons Calculator, Sand Yards to Tons Calculator, Dirt Yards to Tons Calculator, Topsoil Yards to Tons Calculator, Mulch Yards to Tons Calculator, Limestone Yards to Tons Calculator, or return to the main Yards to Tons Calculator.

Frequently Asked Questions

How many tons is 1 cubic yard of concrete? ▼
One cubic yard of normal-weight concrete with a density of 150 lb/ft³ weighs approximately 2.03 short tons (4,050 pounds).
How many cubic yards of concrete are in 1 ton? ▼
One short ton (2,000 pounds) of concrete equals approximately 0.49 cubic yards (about 13.33 cubic feet), because concrete is a very dense material weighing 4,050 pounds per yard.
How many tons is 10 cubic yards of concrete? ▼
Ten cubic yards of concrete weighs exactly 20.25 short tons (40,500 pounds), which represents a typical full load for two standard ready-mix concrete trucks.
How do you calculate tons from cubic yards of concrete? ▼
Multiply the volume in cubic yards by 27 to find cubic feet, multiply by the density in pounds per cubic foot (150 lb/ft³ for standard concrete), and divide by 2,000. Formula: tons = (cubic yards × 27 × density) ÷ 2,000.
Why is concrete significantly heavier per cubic yard than gravel or sand? ▼
Standard gravel (105 lb/ft³) and sand (100 lb/ft³) contain open air voids between loose grains, weighing 1.35 to 1.42 tons per yard. Concrete combines coarse aggregate, sand, Portland cement, and water into a consolidated paste with almost no air voids, resulting in a solid density of 150 lb/ft³ (2.03 tons per yard).