Yards to Tons Calculator Logo
Yards to Tons Calculator

10 Yards to Tons Calculator

Convert 10 cubic yards of aggregate, soil, or concrete to short tons.

Decimals

Presets fill a typical bulk density. Choose "Own Density" to enter your lab/scale value.

Enter the volume in cubic yards. The calculator will update all results instantly based on your density.

Result (short tons)
0
Pounds
0
Metric tonnes (t)
0

Calculated from pounds → kilograms → tonnes.

How Much Does 10 Cubic Yards Weigh?

Ten cubic yards represents a standard commercial delivery benchmark in civil and residential earthworks. Ten cubic yards contains exactly 270 cubic feet (10 × 27). This volume corresponds to the typical capacity of a medium tandem-axle dump truck, forming a conical ground stockpile roughly 14 feet wide and 5 to 6 feet tall when tipped on site.

Because different aggregates have drastically distinct particle structures and void ratios, the weight of a 10-yard delivery varies substantially:

tons = (10 yd³ × 27 ft³/yd³ × density in lb/ft³) ÷ 2,000 lb/ton

Standard dry gravel at 105 lb/ft³ yields 270 × 105 = 28,350 pounds, which calculates to exactly 14.18 short tons. Saturated wet sand (120 lb/ft³) produces 16.20 short tons, standard fill dirt (90 lb/ft³) produces 12.15 short tons, and ready-mix concrete (150 lb/ft³) reaches 20.25 short tons.

Project Coverage and Site Considerations for 10 Yards

Ordering 10 cubic yards requires evaluating practical surface coverage and delivery logistics:

  • Surface coverage: Spread across a 3-inch finished depth, 10 cubic yards covers approximately 1,080 square feet (120 square yards)—ideal for resurfacing a 50-foot two-car gravel driveway. At a thinner 2-inch layer for garden paths, it covers 1,620 square feet (180 square yards). At a 4-inch base thickness, coverage is 810 square feet (90 square yards).
  • Delivery weight impact: At 12 to 16 tons, a fully loaded tandem dump truck can exert considerable axle weight. Verify driveway load-bearing capacity, culvert pipes, and sprinkler heads along the delivery route to avoid surface rutting or concrete cracking.
  • Stockpile moisture retention: Aggregates stored uncovered absorb precipitation rapidly. While clean dry gravel weighs 14.18 tons per 10 yards, saturated gravel can weigh nearly 17 tons, which directly influences supplier freight billing when materials are sold over a certified truck scale.

10 Cubic Yards Weight Across Common Materials

Quick look-up table showing the exact weight of 10 cubic yards (270 ft³) across established material density presets:

Material Bulk Density Weight in Short Tons Total Pounds (lb)
Gravel (dry, 1/4" to 2")105 lb/ft³14.18 tons28,350 lb
Sand (wet)120 lb/ft³16.20 tons32,400 lb
Dirt (standard fill)90 lb/ft³12.15 tons24,300 lb
Topsoil (screened)100 lb/ft³13.50 tons27,000 lb
Concrete150 lb/ft³20.25 tons40,500 lb
Need another batch volume? Explore our guides for 5 yards, 12 yards, 20 yards, or calculate by area and depth with our Square Yards to Tons Calculator.

Frequently Asked Questions

How many tons is 10 cubic yards of gravel? ▼
Ten cubic yards of standard dry gravel (105 lb/ft³) weighs approximately 14.18 short tons (28,350 pounds). In wet stockpile conditions (125 lb/ft³), the weight increases to roughly 16.88 short tons.
How many tons is 10 cubic yards of sand? ▼
Ten cubic yards of wet sand (120 lb/ft³) weighs exactly 16.20 short tons (32,400 pounds). Dry loose sand weighs between 12.15 and 13.50 short tons.
How many tons is 10 cubic yards of dirt or topsoil? ▼
Ten cubic yards of standard fill dirt (90 lb/ft³) weighs approximately 12.15 short tons (24,300 pounds), while screened topsoil (100 lb/ft³) weighs about 13.50 short tons (27,000 pounds).
Is 10 cubic yards a standard dump truck load? ▼
Yes. A medium tandem-axle commercial dump truck typically hauls 10 to 12 cubic yards of aggregate per trip, carrying a payload between 12 and 16 tons depending on local highway gross vehicle weight (GVW) limits.
What is the formula to convert 10 cubic yards to tons? ▼
Multiply 10 cubic yards by 27 to find cubic feet (270 ft³). Multiply 270 by the material density in lb/ft³ (e.g. 105 for dry gravel = 28,350 lb), then divide by 2,000. Formula: tons = (10 × 27 × density) ÷ 2,000.