Yards to Tons Calculator Logo
Yards to Tons Calculator

5 Yards to Tons Calculator

Convert 5 cubic yards of aggregate, soil, or concrete to short tons.

Decimals

Presets fill a typical bulk density. Choose "Own Density" to enter your lab/scale value.

Enter the volume in cubic yards. The calculator will update all results instantly based on your density.

Result (short tons)
0
Pounds
0
Metric tonnes (t)
0

Calculated from pounds → kilograms → tonnes.

How Much Does 5 Cubic Yards Weigh?

Five cubic yards is one of the most common order quantities for residential landscaping, walkway construction, and small patio sub-bases. In physical terms, 5 cubic yards occupies exactly 135 cubic feet (5 × 27). This is roughly equivalent to two to three full pickup truck beds loaded to the brim, or the payload delivered by a single-axle municipal dump truck.

Because volume measures three-dimensional space while tons measure weight, the total weight of 5 cubic yards depends directly on the bulk density of the material:

tons = (5 yd³ × 27 ft³/yd³ × density in lb/ft³) ÷ 2,000 lb/ton

For dry gravel at 105 lb/ft³, 5 cubic yards weighs 135 × 105 = 14,175 pounds, which equals 7.09 short tons. For heavy saturated wet sand at 120 lb/ft³, the same 5 yards weighs 8.10 short tons, while dry fill dirt at 90 lb/ft³ weighs 6.08 short tons.

Coverage and Delivery Logistics for 5 Yards

Before scheduling an aggregate delivery, consider how 5 cubic yards behaves on site:

  • Surface area coverage: At an average layer thickness of 3 inches (0.25 feet), 5 cubic yards covers approximately 540 square feet (60 square yards). At a 2-inch decorative depth, it covers roughly 810 square feet (90 square yards), and at a 4-inch base depth, it covers 405 square feet (45 square yards).
  • Truck access and weight ratings: Delivering 5 yards of gravel or wet sand involves tipping 14,000 to 16,000 pounds onto your driveway. Ensure your driveway surface and overhead tree branches can accommodate a medium single-axle commercial dump truck without cracking asphalt or pavers.
  • Moisture and compaction: Rain exposure before delivery adds significant water weight. Dry gravel (105 lb/ft³) weighs 7.09 tons, but soaking wet gravel can climb to 125 lb/ft³ (8.44 tons). Mechanical plate compaction will also compress loose aggregates by 10% to 15%, reducing placed finished volume.

5 Cubic Yards Weight Across Common Materials

Quick comparison table showing the exact weight of 5 cubic yards (135 ft³) across standard aggregate presets:

Material Bulk Density Weight in Short Tons Total Pounds (lb)
Gravel (dry, 1/4" to 2")105 lb/ft³7.09 tons14,175 lb
Sand (wet)120 lb/ft³8.10 tons16,200 lb
Dirt (standard fill)90 lb/ft³6.08 tons12,150 lb
Topsoil (screened)100 lb/ft³6.75 tons13,500 lb
Concrete150 lb/ft³10.13 tons20,250 lb
Need a different volume? Check our dedicated guides for 3 yards, 10 yards, or calculate surface depth using the Square Yards to Tons Calculator.

Frequently Asked Questions

How many tons is 5 cubic yards of gravel? ▼
Five cubic yards of dry gravel (105 lb/ft³) weighs approximately 7.09 short tons (14,175 pounds). If the gravel is wet or contains sand fines, the weight increases to roughly 8.10 to 8.44 short tons.
How many tons is 5 cubic yards of sand? ▼
Five cubic yards of wet sand (120 lb/ft³) weighs exactly 8.10 short tons (16,200 pounds). Dry loose sand (90 to 100 lb/ft³) weighs between 6.08 and 6.75 short tons.
How many tons is 5 cubic yards of dirt or topsoil? ▼
Five cubic yards of standard fill dirt (90 lb/ft³) weighs approximately 6.08 short tons (12,150 pounds), while screened topsoil (100 lb/ft³) weighs about 6.75 short tons (13,500 pounds).
Can a standard pickup truck carry 5 cubic yards? ▼
No. A typical half-ton or three-quarter-ton pickup truck has a payload limit of 1,500 to 3,500 pounds and a bed volume of 1.5 to 2.5 cubic yards. Carrying 5 cubic yards of aggregate (weighing 6 to 8 tons) requires a commercial medium-duty dump truck or multiple trailer trips.
What is the formula to convert 5 cubic yards to tons? ▼
Multiply 5 cubic yards by 27 to get 135 cubic feet. Multiply 135 by the material density in lb/ft³ (e.g. 105 for dry gravel = 14,175 lb), then divide by 2,000. Formula: tons = (5 × 27 × density) ÷ 2,000.