Yards to Tons Calculator Logo
Yards to Tons Calculator

3 Cubic Yards to Tons Calculator

Convert 3 cubic yards of aggregate, soil, or concrete to short tons.

Decimals

Presets fill a typical bulk density. Choose "Own Density" to enter your lab/scale value.

Enter the volume in cubic yards. The calculator will update all results instantly based on your density.

Result (short tons)
0
Pounds
0
Metric tonnes (t)
0

Calculated from pounds → kilograms → tonnes.

How Much Does 3 Cubic Yards Weigh?

Three cubic yards is a very common order size for residential DIY landscaping, garden pathway construction, raised planter beds, and small patio base preparation. In terms of physical volume, 3 cubic yards occupies exactly 81 cubic feet (3 × 27). This is roughly equal to one and a half standard full-size pickup truck beds filled level to the rails.

Because volume measures 3D spatial capacity while tons measure gravitational mass, the exact weight of 3 cubic yards depends on material bulk density:

tons = (3 yd³ × 27 ft³/yd³ × density in lb/ft³) ÷ 2,000 lb/ton

For dry gravel at 105 lb/ft³, 3 cubic yards weighs 81 × 105 = 8,505 pounds, which converts to 4.25 short tons. Saturated wet sand (120 lb/ft³) totals 4.86 short tons, standard topsoil (100 lb/ft³) weighs 4.05 short tons, and fill dirt (90 lb/ft³) equals 3.65 short tons.

Coverage and Transport Planning for 3 Yards

Before purchasing or picking up 3 cubic yards, keep in mind practical ground coverage and hauling weights:

  • Surface area coverage: Spread at an average 3-inch depth, 3 cubic yards covers approximately 324 square feet (36 square yards)—ideal for an 18-foot by 18-foot patio base. At a 2-inch thickness for garden pathways, it covers 486 square feet (54 square yards), while at a 4-inch depth, it covers 243 square feet (27 square yards).
  • Vehicle payload limitations: Many homeowners assume 3 yards of rock can be hauled in a consumer pickup truck. However, at over 4.2 tons (8,500+ pounds), carrying 3 yards of gravel exceeds the legal payload of even a one-ton (F-350 / 3500) heavy-duty pickup. A commercial delivery or heavy-duty dual-axle dump trailer is necessary.
  • Moisture expansion: Dry aggregate stored outdoor in quarry stockpiles absorbs rainwater readily. While dry gravel weighs 4.25 tons, wet rain-soaked gravel reaches 125 lb/ft³ or 5.06 short tons.

3 Cubic Yards Weight Across Common Materials

Quick look-up table showing the exact weight of 3 cubic yards (81 ft³) across standard aggregate presets:

Material Bulk Density Weight in Short Tons Total Pounds (lb)
Gravel (dry, 1/4" to 2")105 lb/ft³4.25 tons8,505 lb
Sand (wet)120 lb/ft³4.86 tons9,720 lb
Dirt (standard fill)90 lb/ft³3.65 tons7,290 lb
Topsoil (screened)100 lb/ft³4.05 tons8,100 lb
Concrete150 lb/ft³6.08 tons12,150 lb
Need a larger delivery? Check out our guides for 5 yards, 10 yards, or convert surface measurements using the Square Yards to Tons Calculator.

Frequently Asked Questions

How many tons is 3 cubic yards of gravel? ▼
Three cubic yards of standard dry gravel (105 lb/ft³) weighs approximately 4.25 short tons (8,505 pounds). If the gravel is wet or mixed with sand, the weight increases to roughly 4.86 to 5.06 short tons.
How many tons is 3 cubic yards of sand? ▼
Three cubic yards of wet sand (120 lb/ft³) weighs exactly 4.86 short tons (9,720 pounds). Dry sand weighs between 3.65 and 4.05 short tons.
How many tons is 3 cubic yards of dirt or topsoil? ▼
Three cubic yards of standard fill dirt (90 lb/ft³) weighs approximately 3.65 short tons (7,290 pounds), while screened topsoil (100 lb/ft³) weighs exactly 4.05 short tons (8,100 pounds).
Can a pickup truck carry 3 cubic yards of material? ▼
A standard pickup truck bed cannot legally or safely transport 3 cubic yards of aggregate. Three cubic yards of gravel or wet sand weighs 8,500 to 9,700 pounds—far exceeding half-ton or one-ton pickup payload limits. You need a dedicated dump trailer or commercial delivery.
What is the formula to convert 3 cubic yards to tons? ▼
Multiply 3 cubic yards by 27 to find cubic feet (81 ft³). Multiply 81 by the material density in lb/ft³ (e.g. 105 for dry gravel = 8,505 lb), then divide by 2,000. Formula: tons = (3 × 27 × density) ÷ 2,000.